We are the principal manufacturer and exporter of broad assortment of Aluminum Metallizing Wire. Offered array of high purity aluminum wire is majorly used for Metals Spraying & Vapor Metalizing.
These products are manufactured from highly pure, virgin quality aluminum ingot through Casting & Rolling Process.
Our product range is available in various sizes from 9.50mm To 1.6mm with tolerance of +0.00 mm & -0.05 mm. Apart from this, the chemical composition of Aluminum Wire Refer Standard ASTM B 233.
Specifications:
|
Alloy component
|
Together Max 0.14
|
|
Min Al
|
Si
|
Fe
|
V
|
Zn
|
Ga
|
Others
|
|
max
|
max
|
max
|
max
|
max
|
max
|
|
99.86
|
0.04
|
0.06
|
0.02
|
0.03
|
0.03
|
0.02
|
Mechanical Characteristics Refer Standard ASTM B 233:
|
Tensile Strength
|
Elongation
|
Density
|
Boiling Point
|
Melting Point
|
|
8-10 Kg/ mm2
|
< 10 %
|
2.70 g/cm3
|
25190c
|
660oC
|
Available In Packing:
Endless:
Paper Fiber Drum: Barrels with a Weight of 50 to 125 kg Each drum have wooden base on top and bottom to avoid deformation. Silica gel inserted to absorb moisture inside the drum. The wire is placed in a film bag and the barrels are capped. The drums are packed in group of four on a wooden pallet and Protected with Polyethylene Plastic Film.
Coils:
Coils, 20 to 25 kg, Protected against uncoiling with Polyethylene Bands & Goni Pack. If Require These coils were Put into Cardboard Boxes. The boxes are Stacked on a Wooden Pallet and Protected with Polyethylene Plastic Film.
Spools:
Wire layer Wounded on Plastic Spools, Weighing 6 kg to 12 Kg each Protected with Polyethylene and put into Cardboard Boxes. These Boxes are stacked on a Wooden Pallet and Protected with Polyethylene Plastic Film.
For More Information Please See The Attached PDF:
